10kV 630A Front Screened Separable Plug-in Cable Connector - Exportimes.com

Supplier Details

Chengdu Seefar Rubber Plastics Co., Ltd.  

Year Established:

Business Type:Manufacturer

Management Certifiation:

Operational Address:
No. 11 Community, Tuanjie Village, Xindu Town, Xindu District, Chengdu, Sichuan, China (Mainland)

More from this Supplier

10kV 630A Front Screened Separable Plug-in Cable Connector

10kV 630A Front Screened Separable Plug-in Cable Connector
  • 10kV 630A Front Screened Separable Plug-in Cable Connector
Share to:

Silicon rubber shrink accessories are a series of openended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition.

Product Details


Silicone Rubber Cold Shrink Tubular Termination Kits    



Product Description:


1. Silicon rubber shrink accessories are a series of openended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition.


2. The core is removed after the tube has been positioned for installation over an inline connection,terminallug or other similar applications, allowing the tube to shrink and form a waterproof seal.


3. Oursilicone rubber shrink accessoriesare cold applied and therefore they are quicker, easier and safer to install than heat shrink alternatives, and they are also ideal where hot work permits are difficult to obtain.



Provides constant radial pressure & seal without adhesive


Allows for expansion and contraction after installation


Simple & fast installation – no tools or heat required


Quality - long term reliability


Possible applications include electrical installation, cable repair, mechanical protection and moisture barriers





Test Item

Typical Value




one to six cores




Out-door, In-door


Gray, Black

Shore A Hardness


Tensile Strength

1102 PSI(7.6MPa)

Elongation at Break


Tear Strength

150 PPI(26.3KN/m)

Compression Set(22h/175°C)








Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing.


For indoor, outdoor.


Insulation of secondary splices, copper or aluminumconductors.


Relocation of service.


Dig-in repairs.


Sheath repairs


Environmental sealing for communication and other non-electrical applications.


Typical Physical and Electrical Properties

Company Profile

Over twenty years, Seefar has been combining continuous innovation with high efficient production together, and customize high performance elastomer, plastic products and solutions for you. 

We firmly believe: as long as we cherish pure desire and make unremitting efforts, we will be able to have a better future. 
Seefar Rubber Plastics Co. Ltd., established in 1995, has always been devoting itself to providing high performance elastomer, plastic sealing products for customers. It is a high technology enterprise combining research, design, producing, and selling together. Our company owns 3 subsidiary corporations, and 1 technology research and development center. It covers an area of about 40,000 square meters, owns over 300 employees, and our products have been selling to all around the world. 

About our products: 
At the beginning of getting into the sealing material industry, we produce our products with high standards and strict requirements, such as workshop planning, personnel, equipment, marketing and etc. All these aspects have much difference from traditional rubber plastic manufacturers. We also set up a research and develop platform of high-performance sealing materials. We carefully select and use the high-performance sealing materials, which are world-renowned brands and highly estimated. We combine these materials with our unique technic, making our products have greater advantages, such as high and low temperature resistance, anti-corrosion, high pressure resistance, abrasion resistance and etc. to meet the demands of consumers. 
The materials we usually adopt are FFKM, AFLAS, FKM, FVMQ, PVMQ, MQ, HNBR, PEEK, PTFE, PEI, PA, PPS, and other polymer materials. 
Adopting these materials with our unique technology, we produce a series high-performance rubber, plastic sealing products, such as O-ring, Chem-ring sealing strip, rubber, plastic sheet, sealing tape, electronic potting material, insulating material and many other kinds of custom machine parts. 

About our service: 
According to research and development, production, marketing, we can provide all-around service for you, with the advantage of reasonable price, prompt delivery. 
Adopting mall scale production, meeting wide variety of usage, accepting small order quantity, and our technicians will customize practical and ingenious solution for your special technical matters. From all these aspects, we try our best to help our customers getting success. 
We firmly believe that providing customers the best quality products is the most competitive force and the most important thing for a company. 
As a manufacturer, we always insist on the business principle of high standard in quality, and serve high value products to meet the demands of our customers and users. 
With the coming of global economy, facing new challenges and opportunities, our company will keep in the leading position on the aspects of personnel, technology, and quality and provides international cooperators with quality products and favorable prices so as to make better development of the world market. At last, we thank our customers for their support and endeavor and let us create new value together.

Post Buying Request

  • * Title:Please input title
  • * Message:Please input message
  • Your message must be between 20-8000 characters
  • * Your Email Address:Please input Email
  • Your email is also your login ID

You May Be Interested In

辽ICP备09008998号-11 ICP许可证号:辽B-2-4-20110169. Copyright Notice © 2016-2021 Liaoning MEC Group Co., Ltd. All rights reserved.