1. Isolate tooth and then prepare the cavity in a conservative manner. Clean the entire surface with a slurry of pumice and water.
2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. Allow etchant to remain in place for 15 seconds. Etching time should be monitored with a stopwatch. Begin timing at the end of application.
Option: Place etchant on enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.
3. Rinse thoroughly (at least 5 seconds) to completely remove all traces of etchant.
4. Remove excess moisture from the tooth and proceed with the application of Dentex Self-Etching Adhesive referred to manufacturer’s instructions.
WARNING:
• The phosphoric acid in the etchant is a severe eye and skin irritant. Injury may result if the etchant is allowed to remain on the skin or mucosa for extended periods of time. If accidentally splashed into the eye, flush with copious amounts of water and seek medical attention immediately. In case of contact with other tissues, rinse immediately with plenty of water for several minutes.
• Refer to product MSDS for additional warnings.
CAUTIONS:
•Cross-contamination: Product may contain items that are designed for one time use. Dispose of used or contaminated TIPS and syringe tips. Do not clean, disinfect or reuse.
PRECAUTIONS:
• Keep away from direct sunlight.
• See individual component labels for specific expiration dates.
STORAGE:
Store at 4- 25°C or less in a cool and dry place and avoid direct sun exposure. Recap the bottle after use.
DISPOSAL:
After the product is used up, dispose it as normal medical rubbish.
SHELF LIFE: 2 year