1. Interlocking tongue & groove flooring panel
2. Easy stall & Low maintenance
3. Factory supply with competitive price
About US
Operating with a privately-owned company, Nantong WellGrid Composite Material Co., Ltd. is situated in the port city of Nantong, Jiangsu Province, China and neighbored to Shanghai. We have a land area of about 36,000 square meters, of which about 10,000 are covered. The company presently employs about 100 persons.
We manufacture molded, pultruded and phenolic fiberglass grating and fiberglass pultruded structural profiles for industrial, commercial and recreational uses. We are ISO9001 certified; all relevant production works are strictly operating under the Quality Control System, our products up-to-grade rate reaches 99.9%.
About FRP
With our introduction of the world's advanced design & production technologies of the fiberglass composites industry, Our FRP products quality are rating top in China; especially our fiberglass molded grating and pultruded structural profiles are stronger. Meanwhile most of our products are independently tested by worldwide well known agencies with fire, physical, mechanical, electrical properties, such as Omega, SGS, Shanghai FRP Institute.
It is our mission to provide a variety of excellent fiberglass molded and pultruded gratings and fiberglass pultruded structural profiles through our own technological know-how and hands-on experiences, acquired during many years of works.
Our FRP Pultruded Planks Produce & Fabricate
During the pultrusion process, the raw materials are pulled through a heated steel forming die using a continuous pulling device. When the reinforcements are saturated with the resin mixture in the resin bath and the wetted reinforcement package is wrapped in a surfacing veil. The completed package then goes into a performer that roughly forms the package into the appropriate shape to enter the heated die for curing. The die is the exact shape of the final part desired. Upon exiting the die, the part is over 90% cured and solid. The length of the part required is pulled through the cutoff saw and the process is complete.
FRP Plank Properties: 1. Corrosion resistance, aging resistance. 2. Waterproof, fireproof. 3. Light weight, high strength, impact resistance. 4. Good dimension stability. 5. Insulation, good magnetic permeability. 6. Bright color, attractive appearance. 7. Long service life, maintenance free. 8. Easy to cut and install.
The FRP Deck gives a solid floor with a gritted anti-slip surface. It will span 1.5m at a design load of 5kN/m2 with a deflection limit of L/200 and meets all the requirements of BS 4592-4 Industrial type flooring and stair treads Part 5: Solid plates in metal and glass reinforced plastics (GRP) Specification and BS EN ISO 14122 part 2 - Safety of Machinery Permanent means of access to machinery.
Uniform Load
|
Span mm
|
750
|
1000
|
1250
|
1500
|
1750
|
Deflection = L/200
|
3.75
|
5.00
|
6.25
|
7.50
|
8.75
|
Load kg/m2
|
4200
|
1800
|
920
|
510
|
320
|
Concentrated Line Load
|
Span mm
|
750
|
1000
|
1250
|
1500
|
1750
|
Deflection = L/200
|
3.75
|
5.00
|
6.25
|
7.50
|
8.75
|
Load kg/m2
|
1000
|
550
|
350
|
250
|
180
|
Note: The above data has been calculated from measurements made of the full section modulus - EN 13706, Annex D.
|
Our FRP Planks Strong Positions:
1. ISO 9001 certified manufacturer with over 20 years experience
2. A strong work team to supply consult, design, manufacture, fabricate and assembly on site
3. Customs FRP plank design and manufacture
4. In house and third party test for physical, mechanical, aging, fire resistance properties