T407 oiliness additive can be used for blending all kinds of the gear oils, gasoline and diesel oils, anti-wear hydraulic oils, oil film bearing oils and lubricating grease, specially it can be used for blending the lubricant additive package, anti-rust oils and grease.
Oiliness Additive T407Boronated Parathion Ester
Description
T407 oiliness additive can be used for blending all kinds of the gear oils, gasoline and diesel oils, anti-wear hydraulic oils, oil film bearing oils and lubricating grease, specially it can be used for blending the lubricant additive package, anti-rust oils and grease.At present, T406 oiliness additive and T706 anti-rust additive are solid, can't dissolve completely.T407 boronated parathion ester that is liquid can replace completely T406 and T706 with the excellent performances such as the fine oil solubility that it can dissolve in the oils with more than 20%. This product can boost the performances of T501 antioxidant with the 0.1% dosage, and the dosage of T501 can be reduced greatly.
Key Performance Benefits
1.Excellent oily performance and dispersity with high efficiency
2.Fine oil solubility, antioxidation,anti-friction ability and water separability
3.Better extreme pressure and anti-wear performances
4.Outstanding anti-friction, energy-conservation and the metal-deactivation effect
5.Fine oil solubility that it can dissolve in the oils with more than 20%
6.Containing boron nitride, low sulfur content, low phosphorous content
Typical Characteristics
Density (15.6°C), kg/m3
|
950
|
Kinematic Viscosity (100°C), mm2/s
|
20
|
Flash Point (opening), °C
|
150
|
Sulfur, m%
|
3.2
|
Phosphorus, m%
|
1.7
|
Nitrogen, m%
|
2.2
|
boron, m%
|
0.1
|
Recommended Dosage
The dosages of T405 oiliness additive generally recommended to blend lubricants are as follow:
3.0-6.0% in slideway oils, 0.5-1.5% in hydraulic slideway oils, about 2.5% in industry gear oils and 2.0-5.0% in lubricating grease
Packing and storage
Packing: The product is packed in 200 liter metal drum (net weight: 170Kg/drum)
Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.