Quick Details
- Place of Origin: China (Mainland)
- Brand Name: aoteli rapid
- Tire Design: Radial
- Type: Solid Tire
Specifications
Our advantages :
1)Providing our clients with professional services.
2)Quality warranty for 80,000-100,000 kilo meters.
1.Optimized asymmetric pattern design.
2.Integrated performance enhancing comfortable ride and reducing noise.
3.Sidewall with advanced rim protection system.
4.With excellent handling and high-speed stability.
5.Low rolling resistance and fuel consumption and good for environment.
6.Distinctive high-speed and comfortable.
Low noise emaission and low impact noise and vibration when rolling over obstacles
Excellent wear and steering performances
Symmetric tread pattern design for good straight line high speed stability
Provide good traction and braking at all weather conditions (sunny, raining, summer, winter)
Horn-like silent grooves on main ribs
same groove void ratio at any tire cross section for smooth air flow to effectively reduce pattern noise.it connects the grooves as silencer.
Silent pitch arrangement
silent driving experience is achieved by optimized pitch width and arrangement,pitch displacement design to reduce the harmonic noise.
Streamline transversal grooves
superior water evacuation ability with full cover of streamline transversal grooves to ensure good wet traction for better steering and high speed ability.
Special shoulder block design
the special design with sipes at the shoulder block effectively reduces the shoulder heat generation and resonance during tire rolling.
4 wide lontitude grooves
4 longtitudial grooves to enhance water evacuation on wet roads,prevent side slips and improve traction by well-designed angle.
Anti-uneven-wear shoulder strip
2 anti-uneven-wear strips at the shoulder in order to stabilize tire profile and ensure sufficient shoulder support and stability at high speed corning.
Truck&bus tyre manual
1).Tyre Assemble
a.Tire components should be standard and matching.Nonstandard wheel rim should lead to irregular abrasion of tyre tread and explosion of tyre bead
b.When installing the tyre,should notice the directional pattern in accord with the driving directions
c.One axle should be assembled with the same spection,brand,size,pattern
d.Radial and bias tyre should not mixed on one axle
e.if the differ of remaining tread depth above 5mm,should not be assembled on one axle
f.if the differ of air pressure above 1kg,should not be assembled on one axle.
2).Tyre Inflate
a.20% higher than the standard air pressure,tyre life will 9%lowder in average.
b.20%lwer than the standatd air pressure,tyre life will 17%lower in average
c.Air pressure is too high or too lower,tyre will lose its value,the same with worthless
3).Tyre Maintenance and Interchange
a.Interchange the tyre timely can extend 20%life
b.Larger overall diameter should be fixed on outside wheel
c.Under general case,the radial tyres should interchange position per12000kms-15000kms
4).Safe driving
a.Interchange and check the tyre properly and timely,if find rip hole,should mend immediately incase the damage expand
b. Avoid slamming the brakes on,sharp turn
c. Avoid over loading,over speed.
d.The retreaded tyre should not beused on the front wheel
e.Load cargoes reasonable and well distributed,at normal speed
5).Tyre Retreading
a.Sportrak&Safeholder brand can be retreaded,in this way can have long service life and redece the cost.In order to retread more times,be sure to protect the tyre carcass.
b.If you need to retread,please consult the local dealer when the remaining tyre tread is 2-4mm