Plastic drums/barrels 30L 50L for Chemical with UN Approval
The plastic drum/barrel for Chemical, Changzhou plastics factory Co., Ltd is Specializing in the production of plastic drums for packages of chemical. We strictly control the raw materials, production environment and personnel, and the production process is under strict control. The product testing requirements are higher than national standards. Facing the new situation and tendency, Changzhou plastics adheres to the core values of “normative, green, innovative and leading” and strives to build the excellent brand of plastic hollow packaging industry.
The company has strong technical strength, rich production experience, advanced production equipment, with self-developed production capacity, the company can manufacture a variety of products according to customer’s different needs.
Properties of the large plastic drum containers
(1) Washing resistance, wear resistance and long life;
(2) Weather resistance, heat resistance and sunlight resistance;
(3) Good compatibility or processability with the substrates;
(4) Safe and harmless to health, with no pollution to the environment;
(5) Qualified brand new material products, uniform wall thickness, non-toxic, tasteless, acid-resistant, alkali-resistant, corrosion-resistant, good anti-swelling and sealing performance, anti-impact and strong practicability.
Czplasticfactory industrial plastic barrels Advantages
（1）Complete qualifications and trustworthy;
（2）Exquisite workmanship: Advanced one-piece molding technology ensures product toughness;
（3）Quality assurance: Strict process control to ensure the product's acid and alkali resistance and drop and compression resistance;
（4）Strict material selection: Strictly control the quality of raw materials, use qualified higher than food-grade HDPE, and add no harmful substances;
（5）Reasonable distribution of wall thickness;
（6）The hdpe plastic drum mouth is smooth and the workmanship is meticulous;
（7）Clean production environment reflects our professionalism;
（8）High-quality and experienced R&D team;
（9）Complete quality control and testing system.
big plastic drum Product Instructions
1. Unfilled liquids shall be tested for at least 6 months.
2. Do not contain substances that react with the drum or severely weaken the drum.
3. The temperature of filling liquid should not be higher than 60℃. The screw lid shall be screwed after filling liquid is cooled to normal temperature, with a torque of 25N • m ~ 30N • m being appropriate.
4. Before tightening the lid, check whether the sealing ring is installed in place and whether it falls off. When screwing the lid, aim at thread teeth to avoid leakage at drum mouth caused by slipping thread after wrong thread.
5. Liquid containing gas should adopt a closed lid of exhaust and tighten as required.
6. When the drum is filled with liquid, there must be enough space capacity.
7. When stacking plastic drums with removable lids, the internal liquid should be cooled to room temperature before proceeding stack.
8. Avoid dropping during transportation and use, and avoid collision with hard sharp objects.
9. Drums should be stored in a clean, dry, well-ventilated, flat floor warehouse, and the storage temperature of the drums is ≤40℃.
10. The storage life of the drum is 2 years from the production date.
11. The inner container should be packed in a suitable outer packaging. The outer packaging must not have any protruding parts that will scratch the inner container.
12. When filling, it is necessary to prevent the internal liquid from splashing and harming the operators.
13. Stacking and storage
(1) The drums packed with goods shall be stacked with double-sided flat pallets, with the pallet size no more than 1.3m. Each pallet shall be stacked with a maximum of one layer, and the number of stacked drums depends on the pallet size. The edge of the drum shall not exceed the edge of the pallet. The drums on the pallet shall be stacked symmetrically, so that the center of gravity of the whole pallet and its upper drum is located in the center of the pallet.
(2) The closed head plastic drums stacked on the pallets shall be packed and fixed with winding film. During packing, the drums should avoid squeezing or deformed with the deformation below 3%. After packing, the number of stacking layers of the pallets shall not exceed 2. When stacking, the upper and lower layers shall be aligned so that the weight of the upper layer is evenly applied to the lower layer. The ground of the stacking place shall be flat and in a horizontal position.
14. Loading and transportation
For long-distance transportation while loading dangerous articles:
(1) Pallets shall be used for stacking, and the size of pallets shall not be more than 1.3m, while the edge of black plastic drums for sale shall not exceed the edge of pallets.
(2) The receptacles shall be loaded into container or vehicle. The upper and lower layers shall be aligned during stacking to prevent stacking from skewing and instability. The container or vehicle shall have a rigid enclosure and fence at least the same height as the container to prevent the drum from tipping.