Reinforcing Mesh

>=1.00 Bag/Bags
USD 1.00

Processing Time: 1 Days - 60 Days

Packaging Details: STANDARD EXPORTING PACKAGE

Port: Shanghai / Shenzhen / Qingdao / Ningbo / Other

Payment Terms: L/C , T/T , other

Send Inquiry Add to My Favorites

Share to:

Basic Information

Brief description

Reinforcing mesh is heavy type welded wire mesh used for reinforcement of concrete. It is manufactured with black annealed wire or low carbon steel wire for high tensile

Detailed description

Reinforcing Mesh

RM-01: Reinforcing mesh sheets

Reinforcing Mesh is used for the reinforcement of concrete, is manufactured to SANS 1024:2006 and to other international standard specifications.

Features:

Reinforcing Mesh mats are the most commonly used form of prefabricated reinforcement and is particularly suitable for flat slab construction and concrete surface beds. Other designed applications include:
- Retaining and shear walls;
- Beams and columns;
- Concrete paving overlays;
- Precast concrete elements;
- Buildings project;
- Swimming pool and gunite construction.
Reinforcing Mesh mats can be detailed as either flat or bent sheets, depending on the job requirements.
Reinforcing Mesh reinforcement considerably reduces construction time.
SANS 1024:2006 designated fabric mats are standard welded reinforcement mats and can be scheduled simply by reference to the fabric type, sheet dimensions and bending shape codes (The reference is the nominal mass of the fabric in kg/m2 × 100).
The cold-rolled deformed wire used in welded mesh fabric has a characteristic strength (0.2% proof stress) a minimum of 485 MPa compared to 450 MPa for high tensile rebar. Fabric may be used at higher stresses than high tensile rebar resulting in a material saving of up to 8%.

Important design criteria

Many pieces of reinforcing mesh in rolls, and a person is measuring the diameter.

RM-02: Reinforcing mesh in rolls

Placing of Fabric

In order to obtain the best results when using fabric reinforcement, special care must be taken to ensure that the mesh is positioned and maintained at the correct depth after the concrete pour. This can be done by using stools or plastic or concrete spacers. Another option is to place the fabric on poured concrete that has been leveled to the desired reinforcement depth. After placing the mesh the concrete can be topped up to the specified overall slab thickness.

Ideally fabric must be located 50 mm from the top of the slab and where bottom steel is required, it must also be supported 50 mm above the substrate.

Precast reinforcing mesh used in the foundation of a building.

RM-03: Precast reinforcing mesh in a foundation

Lapping of Fabric Mats

It is recommended that in calculating the lap requirement for surface bed welded mesh fabric reinforcement that the formula shall be 25 × diameter + 150 mm or 300 mm, whichever is the greatest.

Quality

The Reinforcing Mesh is manufactured under strict quality controls with all standards conforming to SANS 1024:2006 standard specifications and tolerances and carries the certification mark.

Many sheets of galvanized reinforcing mesh with square holes.

RM-04: Galvanized reinforcing mesh.

Many sheets of indented reinforcing mesh with square holes.

RM-05: Reinforcing mesh with uniform square holes.

A stack of reinforcing mesh is packed with metal belt in workshop.

RM-06: Reinforcing mesh is packed with metal belt.

Four stacks of reinforcing mesh and each two stacks is divided by three woods.

RM-07: Reinforcing mesh is placed on wooden pallet in workshop.

Table 1: Reinforcing Mesh Specifications
Products	Fabric	Mesh Size Nominal Pitch of Wire		Wire Sizes		Cross Sectional area/m width		Nominal mass/m2	Package
Products	Ref No.	Main mm	Cross mm	Main mm	Cross mm	Main mm	Cross mm	Kg	Supplied in
Square Mesh Fabric	888	200	200	12	12	566	566	8.88	sheets only 6 m × 2.4 m
	746	200	200	11	11	475	475	7.46
	617	200	200	10	10	393	393	6.17
	500	200	200	9	9	318	318	5.00
	395	200	200	8	8	251	251	3.95
	311	200	200	7.1	7.1	198	198	3.11
	245	200	200	6.3	6.3	156	156	2.45
	193	200	200	5.6	5.6	123	123	1.93	sheets or rolls
	100	200	200	4	4	63	63	1.00	sheets or rolls
Design Mesh Fabric	1085	100	200	12	8	1131	251	10.85	sheets only 6 m × 2.4 m
	943	100	200	11	8	951	251	9.43
	772	100	200	10	7.1	786	198	7.72
	655	100	200	9	7.1	636	198	6.55
	517	100	200	8	6.3	503	156	5.17
	433	100	200	7.1	6.3	396	156	4.33
	341	100	200	6.3	5.6	312	123	3.41
	289	100	200	5.6	5.6	246	123	2.89
Longitudinal Mesh Fabric	278	100	300	6.3	4	312	42	2.78	sheets only 6 m × 2.4 m
	226	100	300	5.6	4	246	42	2.26	sheets only 6 m × 2.4 m
	133	100	300	4	4	126	42	1.33	sheets or rolls 60 m × 2.4 m
Special Mesh	200	100	100	4	4	126	126	2.00
Special Mesh	156	100	100	3.55	3.55	99	99	1.56

Table 2: Structural fabric reinforcement design data
DIA mm	Area mm2	Mass kg/m	Wire Spacing mm
DIA mm	Area mm2	Mass kg/m	50	75	100	125	150	175	200	225	250	275	300	DIA
12	113.11		2262	1508	1131	905	754	646	566	503	452	411	377	12
12		0.888	17.76	11.84	8.88	7.1	5.92	5.07	4.44	3.95	3.55	3.23	2.96	12
11	95.05		1901	1267	950	760	634	583	475	422	380	346	317	11
11		0.746	14.92	9.95	7.46	5.97	4.97	4.26	3.73	3.32	2.98	2.71	2.49	11
10	78.55		1571	1047	786	628	524	449	393	349	314	286	262	10
10		0.617	12.34	8.23	6.17	4.94	4.11	3.53	3.09	2.74	2.47	2.24	2.06	10
9	63.63		1273	848	636	509	424	364	318	283	255	231	212	9
9		0.500	9.99	6.67	4.99	3.99	3.33	2.86	2.5	2.22	2.00	1.82	1.67	9
8	50.27		1005	670	503	402	335	287	251	223	201	183	168	8
8		0.395	7.9	5.27	3.95	3.16	2.63	2.26	1.98	1.76	1.58	1.44	1.32	8
7.1	39.6		792	528	396	317	264	226	198	176	158	144	132	7.1
7.1		0.311	6.22	4.15	3.11	2.49	2.07	1.78	1.56	1.38	1.24	1.13	1.04	7.1
6.3	31.18		624	416	312	249	208	178	156	139	125	113	104	6.3
6.3		0.245	4.9	3.27	2.45	1.96	1.63	1.40	1.23	1.09	0.98	0.89	0.82	6.3
5.6	24.63		493	328	246	197	164	141	123	109	99	90	82	5.6
5.6		0.193	3.86	2.57	1.93	1.54	1.29	1.11	0.97	0.86	0.78	0.71	0.64	5.6
4	12.57		251	168	126	101	84	72	63	56	50	46	42	4
4		0.099	1.98	1.33	1	0.8	0.67	0.57	0.5	0.44	0.4	0.36	0.33	4

Hot products list:

Welded wire mesh rolls for reinforcing concrete, floors, and roads, slabs.
- 2.1 m × 30 m × wire diameter 4.0 mm (mesh 200 mm × 200 mm) wt/roll 63.7 kg + 1.5%.
- 2.1 m × 30 m × wire diameter 5.0 mm (mesh 200 mm × 200 mm) wt/roll 95.0 kg + 1.5%.
Soft annealed black binding wire for civil construction, 0.16–0.6 mm wire, 25 kg/roll.

Company Profile

Anping Enzar Metal Products Co., Ltd. is located in the Anping County which is called "Chinese Wire Mesh County". We are mainly engaged in the production and sale of welded wire mesh. Since it establishment, our company has gained the trust and support of domestic and foreign customers. “Providing the fine wire mesh, creating the famous brand of the line” is our invariable aim.

Now our company has more than 160 types of machines and more than 100 employees. Through years of management and development, we have developed "Enzar" brand wire mesh products. With advanced equipment and skilled engineering technicians, we guarantee that we can provide you with high quality products in the shortest time. So our products are sold in more than 30 regions of China and also exported to overseas regions, such as Europe, America, East Asia, South Asia, Middle East and Africa.